The Tap Factory Milo Filtered Cold & Instant Boiling Water Tap with WRAS-Approved Boiler & Filter - Brushed Steel

The Milo - Top of the range boiling tap performance from The Tap Factory
The Milo, along with the 'C-spout' Cromo, is a top-of-the-range boiling tap. Unusually (not only for its price but also for boiling taps in general) the Milo holds a UK WRAS approval for its quality boiling tank design. It also holds a whole host of other approvals to demonstrate that you don't always have to pay a fortune for a quality product.

The fully-featured boiler has stainless steel elements, sensors and dry float; a unique Venturi expansion system that ensures consistent temperature cup after cup; a highly accurate thermostat and 2 preset temperatures. It is powered by a standard 13 amp plug - no tricky installation here. A 2.4 litre capacity means there's more than enough capacity for domestic needs.

Unlike most conventional 3-in-1 taps which dispense instant hot water as well as mains hot & cold water, from the Milo you get instant filtered hot water, standard hot, and also filtered cold water all from the same spout. This means that as well as being able to get rid of your kittle, you can also stop buying bottled water or filter jugs.

The tap itself has a beautiful brushed steel finish and a U-shaped spout that swivels left and right. The standard hot and filtered cold are controlled by the single lever. The boiling function is controlled on the opposite side. Depressing the child safety button allows for the handle to be rotated, drawing the boiling water from the tank. With a spring-loaded mechanism, once you've rotated the handle, the boiling water stream remains on until released, where it returns back to the off position, allowing for safe operation in the presence of children.

The tap itself has a beautiful brushed steel finish and a modern U-shaped spout. The conventional mixer handle allows for mixed hot and filtered cold water as with any typical kitchen tap. The boiling function is controlled on the opposite side. Depressing the child safety button allows for the handle to be rotated, drawing the boiling water from the tank. With no spring loading, once you've rotated the handle, the boiling water stream remains on until you rotate it back to the centre, allowing for hands free operation.

Features:

• Complete set includes high quality boiler tank and filter kit
• WRAS approval (registration number 1506902)
• CE approved
• LVD/ECM approved
• RoHS approved
• Brushed steel finish
• 2 preset temperature settings: 95°C or 98°C
• Thermostat is accurate to within 0.5°C
• 2.4 litre hot water capacity
• Unique Venturi expansion system
• Vented system powered by a standard 13 amp plug - plugs straight into a standard wall socket so no electrician required
• Minimum 1 bar water pressure
• High grade boiling water filter protects the boiler tank
• Swivel spout

Filtered Boiling Water - Tastes Better, Last Longer
On its way into the boiler unit, the water passes through a high grade filter. The Nano Carbon Phosphate filter coats the calcium in your water to stop it sticking to the tank whilst also removing chlorine to improve the taste. This protects the tank and also gives you cleaner, purer boiling water.

Important: The filter unit must be changed every 6 months to avoid invalidating the guarantee of the tank unit - see our recommended extras.

Compact Tank Takes up Less Space:

• Height - 345mm
• Width - 225mm
• Minimum tap hole size - 35mm

Please note : The maximum water pressure for the tap is 3 bar. The maximum water pressure for the boiler tank is 5 bar.