Loba Supra 2K Lacquer 5 litres – includes hardener

LOBADUR® WS 2K Supra AT is the hardest waterborne finish on the market. Ceramic-reinforced waterborne 2-component polyurethane finish, for extremely heavy wear.
The exceptionally high resistance to scratching and durability of the finish gives wooden flooring long-lasting protection.
It can also be used fully after a curing time of just 24 hours. Elastic, excellent chemical and abrasion resistance.

We recommend firstly applying a prime coat – EasyPrime or PrimaSeal Plus
Shake product, add hardener to base at a ratio of 10 : 1 and then shake to mix.
For mixing smaller quantities, use the LOBATOOL® Mixing Container or a scale to weigh out the components.
Usable up to 2 hours after mixing.
The surface must be sanded properly, wood moisture content max. 12%.
The floor must be dry and free from any old coatings, oil, grease, wax, silicone, sanding dust and other contaminants.
Room temperature +15°C to +25°C, relative humidity 40% to 75%, material temperature +18°C to +25°C.
Ensure working areas are adequately ventilated.
Shake the contents well, the product is supplied ready for use and must not be diluted!
APPLICATION RATE – 8 to 10 sqm per litre, approx 40 to 50 sqm per 5 litre tub.
INTERMEDIATE SANDING
Able to recoat without intermediate sanding within the first 24 hours.
After this time, an intermediate sanding is necessary.
An intermediate sanding before the last application will achieve an even finish.
Use LOBATOOL® Perforated Pad P120 or finer, alternatively Sanding Net P120 or finer.
Carefully remove dust before overcoating.
DRYING TIME
Earliest possible recoating after 4-6 hours.
Careful use possible after 4-6 hours.
Earliest possible intermediate sanding after 8-10 hours.
Full traffic capability and coverage after 24 hours.
First care after 3 days.