Osmo Tanin Spot Remover 6602 250mlMaintenance

• For both Interior and Exterior wood surfaces
• Especially suited for oak kitchen worktops, bathroom surfaces, cladding, furniture, etc.
• Highly effective removal of black spots on wood species containing tannic acid
• Easy to use spray bottle
• Ideal for untreated wood before oil finishing, or existing oiled wood surfaces

Surface PreparationRemove debris and dirt from the surface. Tannin Spot Remover is ready to use. Do not thin. Before applying, test Osmo Tannin Spot Remover on substrate. (Trial application required!)Method of ApplicationSpray Osmo Tannin Spot Remover evenly onto the spot until the surface is completely covered. Allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat and then wipe clean with clear water. After drying, apply a suitable Maintenance Oil on the treated area, so that the wood is protected again.NoteProtect metal (e.g. furniture hardware) and plants against direct contact (e.g. cover farm and ornamental plants with a tarpaulin or place out of reach).Depending on the stubbornness of the stain, some bleaching of the wood colour could be encountered. To reduce further bleaching, the surface should be re-finished with an appropriate Osmo oil. Carrying out small trials are highly recommended.