60 Grit Diamond Polishing Pad

Grit: 60 Grit Size: 55mm x 90mm Use: Wet or Dry Ideal for edge grinding and polishing, great for getting to complicated areas Also available in 120 grit The RUBI range of diamond rubber blocks are ideal for roughing and polishing edges, both cuts and surfaces of natural stone and ceramic tile. The RUBI diamond rubber studs are semi-flexible and their EVA rubber body allows excellent adaptation to the user's hand. The holding area has a lateral indentation that increases the ergonomics of the block and reduces hand fatigue during use. The diamond rubber pads have been designed to work manually on those areas where access with power tools is very difficult, such as interior angles, hollow areas or corners and for roughing and smoothing chipped or sharp edges. To achieve a good result, both the type of material and the state in which it is found must be taken into account. RUBI diamond rubber blocks can be used dry, but wet use is recommended, either by wetting the block or providing a source of continuous cooling. The RUBI range of diamond rubber pads comes in different granulometries to be able to carry out different polishing and finishing jobs. It is very important that, in polishing work, a gradual degradation is carried out using the different grains successively. Starting with the largest grain to the smallest. In roughing and/or edge smoothing work, the movement of the block must always go from the top (the most visible) to the bottom. This reduces the risk of chipping or damage to the material.